How do I drain the water from my Sharp automatic washing machine

STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one. … STEP 2: Locate the drain hose and water supply hoses. … STEP 3: Drain the washing machine of water. … STEP 4: Remove a drain hose clog. … STEP 5: Remove a drain pump clog.

How do you drain water from a sharp fully automatic washing machine?

STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one. …
STEP 2: Locate the drain hose and water supply hoses. …
STEP 3: Drain the washing machine of water. …
STEP 4: Remove a drain hose clog. …
STEP 5: Remove a drain pump clog.

What causes a washing machine not to drain and spin?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

How do you manually drain an automatic washing machine?

Step 1: Turn off the power and lay down towels.
Step 2: Locate the drain hose at the back of the washing machine.
Step 3: Drain the water.
Step 1: Turn off the power and lay down towels.
Step 2: Locate the drain hose.
Step 3: Drain the water.
Step 4: Scrub the filter.

How do you drain water from washing machine before moving?

To begin, turn off the water outlets leading into the washer. Be sure that both the hot and cold water valves are completely shut. Set the washer to warm wash and turn it on for 30 seconds to allow the water in the hoses to drain into the. Move the setting to spin to allow the water to drain out of the machine.

How far down should a washer drain hose go?

In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.

Why is there water in the bottom of my washing machine?

Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.

Can a washing machine drain upwards?

The washing machine discharge maximum height is 96″ for top and front loading machines. However, installing the extended height above the washing machine could cause that extended height of water to drain back into washing machine.

How do you drain a washing machine mid cycle?

Press the “Start/Pause” button on the front of your washing machine and wait a few minutes for the washer to safely drain away water in the drum before it unlocks the door. Once this is done, you’ll be able to open the door and add/remove items or make chances to the cycle.

How long can a washing machine drain be?

The answer to this question is complicated by the fact that it is much harder to pump water vertically than horizontally. Washing machine manuals typically specify a minimum height of 39” for the entry of the drain hose into the standpipe or faucet box, and a maximum height of 96” (8 feet).

Article first time published on

What happens if washer drain hose is too long?

What Happens if the Drain Hose is Too Long? First of all, a long drain hose can overflow and clog your drainage system. A clogged drainage system can make water stuck in the shower tray. Also, it can make water trapped in your washing machine.

How do I know if my washing machine drain hose is clogged?

The surest and most obvious sign that your washing machine’s drain hose is clogged is if you notice that the water in your machine isn’t draining away properly. Many people first notice this after putting their laundry on the spin cycle and realizing that it’s still soaking wet at the end of the timer.

How much water does a washing machine drain?

Washers with a capacity between 4 and 5 cubic feet use an average of 15.6 gallons of water per load. Washers with a capacity above 5 cubic feet use an average of 20.5 gallons of water per load.

Can I extend washing machine drain hose?

If a remodeling project forces you to move the washing machine too far from the drain and the water supply for the hoses to reach, you don’t have to relocate the plumbing. … Lengthening the drain hose isn’t difficult, because you can buy a drain hose extension that simply clamps onto the end of your existing hose.

What size is washing machine drain pipe?

Drain and Trap Requirements A 2-inch drain pipe is required for all washing machines. The former requirement of 1 1/2-inch pipe is not enough to handle the fast drainage of modern washers. As with all plumbing fixtures and appliances, a washing machine drain pipe must also contain a P-trap.